SMARTReporter 3.1.7 1

SMARTReporter

OSX用のSMART診断ツール、SMARTReporterを導入しました。

Transcend TS1TSSD370S

/Applications/SMARTReporter.app/Contents/Resources/smartctl --tolerance=permissive --smart=on -a disk0

smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TS1TSSD370
Serial Number:    xxxxxxxxxx
Firmware Version: N1114B
User Capacity:    1,024,209,543,168 bytes [1.02 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Feb 12 07:38:13 2016 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
     was never started.
     Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
     without error or no self-test has ever 
     been run.
Total time to complete Offline 
data collection:   (    0) seconds.
Offline data collection
capabilities:     (0x71) SMART execute Offline immediate.
     No Auto Offline data collection support.
     Suspend Offline collection upon new
     command.
     No Offline surface scan supported.
     Self-test supported.
     Conveyance Self-test supported.
     Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
     entering power-saving mode.
     Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
     General Purpose Logging supported.
Short self-test routine 
recommended polling time:   (   2) minutes.
Extended self-test routine
recommended polling time:   (  10) minutes.
Conveyance self-test routine
recommended polling time:   (   2) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   100   100   000    Old_age   Offline      -       0
  5 Reallocated_Sector_Ct   0x0000   100   100   000    Old_age   Offline      -       0
  9 Power_On_Hours          0x0000   100   100   000    Old_age   Offline      -       392
 12 Power_Cycle_Count       0x0000   100   100   000    Old_age   Offline      -       534
160 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
161 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       107
163 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       48
164 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       14481
165 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       39
166 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       7
168 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       3000
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       100
175 Program_Fail_Count_Chip 0x0000   100   100   000    Old_age   Offline      -       0
176 Erase_Fail_Count_Chip   0x0000   100   100   000    Old_age   Offline      -       0
177 Wear_Leveling_Count     0x0000   100   100   050    Old_age   Offline      -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0000   100   100   000    Old_age   Offline      -       0
181 Program_Fail_Cnt_Total  0x0000   100   100   000    Old_age   Offline      -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
192 Power-Off_Retract_Count 0x0000   100   100   000    Old_age   Offline      -       6
194 Temperature_Celsius     0x0000   100   100   000    Old_age   Offline      -       0
195 Hardware_ECC_Recovered  0x0000   100   100   000    Old_age   Offline      -       1653
196 Reallocated_Event_Count 0x0000   100   100   016    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0000   100   100   050    Old_age   Offline      -       0
232 Available_Reservd_Space 0x0000   100   100   000    Old_age   Offline      -       100
241 Total_LBAs_Written      0x0000   100   100   000    Old_age   Offline      -       129310
242 Total_LBAs_Read         0x0000   100   100   000    Old_age   Offline      -       165560
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       231696

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

HGST HUA722010CLA330

An error occurred or this disk does not support S.M.A.R.T. - full output follows: smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org Smartctl open device: disk1 failed: Operation not supported by device

FireWireで接続したTimeMachine用のHDDのSMART情報は見れませんでした。
マウンタに載せて、SATAで接続して見ます。

USBで接続して、Windows上からDiskInfoで見るのもありかも知れません。