Sun Microsystems SPARCstation 4 1

Sun Microsystems SPARCstation 4

Power-ON Reset

$$$$$ WARNING: No Keyboard Detected! $$$$$
MMU Context Table Reg Test
MMU Context Register Test
MMU TLB Replace Ctrl Reg Tst
MMU Sync Fault Stat Reg Test
MMU Sync Fault Addr Reg Test
MMU TLB RAM NTA Pattern Test
MMU TLB CAM NTA Pattern Test
MMU TLB LCAM NTA Pattern Test
IOMMU SBUS Config Regs Test
IOMMU Control Reg Test
IOMMU Base Address Reg Test
IOMMU TLB Flush Entry Test
IOMMU TLB Flush All Test
SBus Read Timeout Test
EBus Read Timeout Test
D-Cache RAM NTA Test
D-Cache TAG NTA Test
I-Cache RAM NTA Test
I-Cache TAG NTA Test
Memory Address Pattern Test
FPU Register File Test
FPU Misaligned Reg Pair Test
FPU Single-precision Tests
FPU Double-precision Tests
FPU SP Invalid CEXC Test
FPU SP Overflow CEXC Test
FPU SP Divide-by-0 CEXC Test
FPU SP Inexact CEXC Test
FPU SP Trap Priority >  Test
FPU SP Trap Priority <  Test
FPU DP Invalid CEXC Test
FPU DP Overflow CEXC Test
FPU DP Divide-by-0 CEXC Test
FPU DP Inexact CEXC Test
FPU DP Trap Priority >  Test
FPU DP Trap Priority <  Test
PROC0 Interrupt Regs Tests
Soft Interrupts OFF Test
Soft Interrupts ON Test
PROC0 User Timer Test
PROC0 Counter/Timer Test
DMA2 E_CSR Register Test
LANCE Address Port Tests
LANCE Data Port Tests
DMA2 D_CSR Register Test
DMA2 D_ADDR Register Test
DMA2 D_BCNT Register Test
DMA2 D_NADDR Register Test
ESP Registers Tests
DMA2 P_CSR Register Test
DMA2 P_ADDR Register Test
DMA2 P_BCNT Register Test
PPORT Registers Tests
NVRAM Access Test
TOD Registers Test
initializing TLB
initializing cache

Allocating SRMMU Context Table
Setting SRMMU Context Register
Setting SRMMU Context Table Pointer Register
Allocating SRMMU Level 1 Table
Mapping RAM
Mapping ROM

ttya initialized
Probing Memory Bank #0 32 Megabytes
Probing Memory Bank #1 Nothing there
Probing Memory Bank #2 Nothing there
Probing Memory Bank #3 Nothing there
Probing Memory Bank #4 Nothing there

Starting real time clock...
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Probing CPU FMI,MB86904
Probing /iommu@0,10000000/sbus@0,10001000 at 4,0  espdma esp sd st SUNW,bpp ledma le
Probing /iommu@0,10000000/sbus@0,10001000 at 0,0  Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 1,0  Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 2,0  SUNW,tcx
Probing /iommu@0,10000000/sbus@0,10001000 at 3,0  power-management SUNW,CS4231
Probing Memory Bank #0 32 Megabytes
Probing Memory Bank #1 Nothing there
Probing Memory Bank #2 Nothing there
Probing Memory Bank #3 Nothing there
Probing Memory Bank #4 Nothing there
Starting real time clock...
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Probing CPU FMI,MB86904
Probing /iommu@0,10000000/sbus@0,10001000 at 4,0  espdma esp sd st SUNW,bpp ledma le
Probing /iommu@0,10000000/sbus@0,10001000 at 0,0  Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 1,0  Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 2,0  SUNW,tcx
Probing /iommu@0,10000000/sbus@0,10001000 at 3,0  power-management SUNW,CS4231

SPARCstation 4, No Keyboard
ROM Rev. 2.24, 32 MB memory installed, Serial #xxxxxxxx.
Ethernet address 37:x:xx:xx:xx:xx, Host ID: xxxxxxxx.


The IDPROM contents are invalid

Boot device: /iommu/sbus/ledma@4,8400010/le@4,8c00000  File and args:
Internal loopback test -- Did not receive expected loopback packet.

Can't open boot device

Type  help  for more informationok

Sun Microsystems SPARCstation 4をいじってみます。
この筐体もNVRAMが生きていました。
(電源を再投入すると、ethernet address/hostidの値が変わるので、このNVRAMも故障していました)

Ethernet MACを見て、Ethernet addressの先頭を修復出来る可能性があります。

調査すると、ethernet addressの先頭が'0'が'8'になるはずなので、値が狂っているのが分かります。
世代によって、ethernet addressの先頭が変わるようですが、ss5のethernet addressが'8:0:20-'という記事がありました。

NVRAM交換

NVRAMを交換したので、値がリセットされました。
未使用品ですが、mkpで入力した値がリセットされてしまうので、寿命を迎えていました。